ASSEMBLY INSTRUCTIONS

BBQARM with Universal Drawbar Mount for Caravan

  • Loosen off the two bolts on the Universal Drawbar Mount
  • Place the mount into position on your drawbar.
  • Using a shifting spanner, tighten the bolts to secure it in place
  • Unwind the handle to loosen the clamp at the front
  • Place the arm into position and tighten handle
  • Place the tray into the square tube end of arm
  • Tighten the locking screw/wing-nut to reduce any movement

BBQARM with Vehicle Tow-Hitch mount for tow-vehicle

  • Slide mount into your tow-hitch receiver.
  • Slide in you locking pin
  • Unwind the handle to loosen the clamp at the front
  • Place the arm into position and tighten handle
  • Place the tray into the square tube end of arm
  • Tighten the locking screw/wing-nut to reduce any movement

BBQARM MATE

  • Designed to connect to your existing BBQARM
  • Undo the bolt at the front of the clamp
  • Wrap the clamp around the lower shaft/round tube section of your existing BBQARM arm and tighten bolt all the way. Tighten with shifter but allow your arm to swivel (so not too tight).
  • Place the tray on to the end of your arm.
  • Tighten the wing-bolt to secure your tray 
  • If you do not have an existing BBQARM you can attach this product to the shaft of your jockey wheel